|
SpotTEC - High-frequency Spot Generator |
|
Tantec SpotTEC is used for treatment of profiles, cables and injection moulded parts. The SpotTEC is easily adopted into any production line and offers the user a high level of flexibility in use. The SpotTEC is based on the principle of high-voltage discharge in atmospheric air blown towards a substrate surface.
The spotTEC offered by Tantec permits easy pre-treatment of surfaces of three-dimensional moulded or extruded plastic parts, profiles etc. with low investment and running costs. The SpotTEC is based on the principle of high-voltage discharge in the high-frequency area. A blower presses the discharge which is established between the two electrodes integrated in the discharge head, against the substrate to be treated, thus eliminating the need for a counter electrode.
The SpotTEC can be integrated easily and quickly in new or existing production lines to promote adhesion of glue, inks or coating. The system is available with a single or double electrode head; other versions are available on request. The SpotTEC system provides surface treatment solutions for a variety of plastic products and applications. The SpotTEC complies with the CE requirements and EMC regulation.
Features:
| Easy to install and use |
The system requires no adjustment of treatment parameters. Simply connect to mains and go. |
| Easy maintenance |
Only necessary to exchange the metal electrodes. |
| Single or dual head configuration |
The generator can be equipped with either a single or double treatment head configuration. |
| Air flow control |
During the treatment process the air flow is monitored to ensure proper airflow at all times. |
| LED’s for running conditions |
During the entire treatment process the front panel LED’s will inform about current generator status. |
| Treatment flexibility |
Designed for treatment of non-conductive surfaces at lower line speeds. (max. 20m/min). |
| Technical Specifications |
SpotTEC Single |
SpotTEC Dual |
SpotTEC Discharge Head |
| Mains voltage and frequency |
115 or 230 VAC 50/60 Hz |
115 or 230 VAC 50/60 Hz |
N/A |
| Output voltage/power |
Voltage: 2 x 6.5 kV Power: 550 |
Voltage: 2 x 6.5 kV Watt Power: 1100 Watt |
N/A |
| Output frequency |
Approx. 25 kHz |
Approx. 25 kHz |
N/A |
| Power consumption |
Max. 600 VA |
Max. 1100 VA |
N/A |
| Dimensions in mm (LxWxH) |
500 x 485 x 195 (incl. connections) |
500 x 485 x 195 (incl. connections) |
60 x 40 x 160 (excl. connections) |
| Weight in kg |
13 (23 at 115 VAC) |
19 (29 at 115 VAC) |
1.7 (incl. hose) |
| Treatment width in mm |
N/A |
N/A |
45-65 mm |
| Treatment distance in mm |
N/A |
N/A |
5-20 mm |
| Treatment speed in m/min |
N/A |
N/A |
Max. 20 m/min |
| Regulation compliance |
CE - RoHs - WEEE |
CE - RoHs - WEEE |
CE - RoHs - WEEE |
 SpotTEC_GB_web.pdf
Add this page to your favorite Social Bookmarking websites
|
