Tantec Power Generator HV-X is a new series of advanced corona and plasma power supplies, versatile for stand-alone surface treaters or as a fully integrated treater component in automated lines built by OEM’s.
For stand-alone treaters the HV-X series is either controlled by an operator interface control with a 5.7” graphic touch display including a built-in PLC with 16 inputs and 16 outputs and RS485 Modbus port for data management or via a hard wired PLC interface.
For OEM’s the standard RTU 4-Wire Modbus control offers a unique communication platform. Profibus, CANopen and others are optional and require a separate protocol converter to provide instant bus connectivity, i.e. Anybus Communicator.
Generator HV-X02, HV-X10 and HV-X20
HV-X generators are available with 200, 1000 and 2000 Watt power output, and operate with 17 different high voltage transformers in configurations ranging from 2 kV up to 80 kV output voltage.
This extensive span provides surface treatment solutions for all products regardless of part size, shape or capacity.
Control modes:
|
|
|
|
| The microprocessor controlled HV-X series includes four selective control modes: |
|
| Simple mode: |
|
Only the very basic parameters can be adjusted |
|
|
|
using the knob and the LCD display on the front panel. |
| Modbus (Standard): |
|
Full parameter controlling incl. setting, storing, |
|
|
|
verification and surveillance of all parameters. |
|
|
|
(Profibus, CANopen and other bus controls are optional). |
|
|
|
| Operator interface control, Tantec Remote-X. (Optional): |
|
Full parameter controlling incl. setting, storing, verification and surveillance of all parameters. |
|
|
|
| PLC configuration (Standard): |
|
Via main machine PLC or similar central control the |
|
|
most important parameters can be controlled and adjusted. |
Other features:
|
|
|
|
| Output discharge control: |
|
Either voltage or power limitation. |
|
|
|
|
|
| Watt density control: |
|
Based on parts/min., m/min. or m2/min. |
|
|
|
(Bus/Operator Interface Control mode only). |
|
| Advanced treatment: |
|
Timer with 5 modes, 0.02-60 seconds. |
|
|
|
|
|
| Electrode matching: |
|
70, 80, 90 and 100%. |
|
|
| Technical Specifications |
HV-X02 |
HV-X10 |
HV-X20 |
HT-Transformers |
| Mains voltage and frequency |
100-240 VAC 50/60 Hz |
100-240 VAC 50/50 Hz |
100-240 VAC 50/50 Hz |
400 V |
| Output voltage/power |
Max. 400 Vp |
Max. 400 Vp |
Max. 400 Vp |
1–40 kV (17 types) |
|
0-200 Watt |
0-1000 Watt |
0-2000 Watt |
0-2000 Watt |
|
|
|
(110 V: Max. 1500 Watt) |
|
| Power consumption |
300 VA |
1200 VA |
2150 VA |
0-2000 Watt |
| Ramp up time |
5-30 ms, depending |
5-30 ms, depending |
5-30 ms, depending |
5-30 ms, depending |
|
on power load |
on power load |
on power load |
on power load |
| Shut down time |
<1 ms |
<1 ms |
<1 ms |
<1 ms |
| Dimensions in mm (LxWxH) |
430 x 470 x 200 |
430 x 470 x 200 |
430 x 470 x 200 |
210 x 164 x 218 (Dry) |
|
|
|
|
242 x 242 x 267 (Oil) |
| Weight in kg |
12.5 |
12.5 |
14.5 |
5-11 kg, depending on |
|
|
|
|
type of transformer |
| Operator Interface Control |
5.7” STN color touch display |
5.7” STN color touch display |
5.7” STN color touch display |
|
| (Optional) |
Ports: (1) USB - (1) Ethernet |
Ports: (1) USB - (1) Ethernet |
Ports: (1) USB - (1) Ethernet |
|
|
- (1) Serial RS485 |
- (1) Serial RS485 |
- (1) Serial RS485 |
N/A |
| Bus communication system |
Standard: RTU 4-Wire Modbus, |
Standard: RTU 4-Wire Modbus, |
Standard: RTU 4-Wire Modbus, |
|
|
57.6Kbaud, 8bit. Optional: |
57.6Kbaud, 8bit. Optional: |
57.6Kbaud, 8bit. Optional: |
|
|
CANopen/Profibus and others |
CANopen/Profibus and others |
CANopen/Profibus and others |
N/A |
| Regulation compliance |
CE – RoHs - WEEE |
CE – RoHs - WEEE |
CE – RoHs - WEEE |
CE – RoHs - WEEE |
 Download our PDF product sheet
|
