Automotive

Plasma and Corona Treatment in the Automotive Industry

Working with plastic materials such as PE, PP, PS and EPDM, you have already experienced the challenges low surface energy present to you. It is impossible to achieve durable high quality results in bonding, coating, printing and varnishing processes.These processes depend on high surface energy and to reach this, surface treatment is necessary. Plasma and Corona treatment changes the chemical structure in the surface of plastic materials and rises the surface energy resulting in improved adhesion and wettability properties. Plasma and Corona Surface Treatment is a preferred and suitable solution in the automotive industry and we customize the machines to suit your product and production line.

With plasma and Corona Treatment, you have the ability to achieve:

  • Even and uniform treatment to all surfaces on Three Dimensional parts
  • Treatment of specific spots on Three Dimensional parts
  • Treatment of large parts
  • Surface cleaning on metal
  • Surface modification without affecting the bulk material.
  • Cost efficiency and long lasting durability of adhesion properties
  • Environmental friendly solutions that meets regulative requirements

Plasma and Corona Surface Treatment is applied for surface activation of:

  • Interior parts
  • Exterior parts
  • Powertrain parts
  • Profiles

Send your sample for a test free of charge in our testing facilities

At Tantec we are experienced in developing solutions to the automotive industry and our core competences is 3D treatment with even and uniform treatment with durable effect. We have our own in-house testing facilities and offer a free test of your part. Send a sample and explain your project to us. After testing, you will receive a documented report and we advise you in the best suitable treatment solution.

Europe/International
Send your sample to:

Tantec A/S
Industrivej 6
6640 Lunderskov
Denmark

United States of America
Send your sample to:

Tantec EST Inc.
160 North Brandon Drive
Glendale Heights
IL 60139
U.S.A.

Tantec Plasma and Corona Surface Treatment Systems applied in the Automotive Industry

VacuTEC – 3D treatment of small and large parts

It is used to promote adhesion before painting, lacquering, printing, electroplating or adhesive bonding or to clean surfaces and remove organic residues. VacuTEC Plasma treatment is a low temperature process ranging between 40-120°C.

PlasmaTEC-X – powerful partial-surface treatment

Atmospheric Plasma treatment provides an economical solution for the cleaning and activation of complex surfaces that can not be treated using regular corona treatment mechanisms.

ProfileTEC – a treating system for EPDM profiles

It treats multiple surfaces and difficult configurations. A customized ProfileTEC usually consists of 3-5 treating units (heads) and is capable of handling high line speeds (20-25 m per minute depending on the type of profile) and complex parts made of conductive and non-conductive rubber.

We use cookies to improve our website and your experience when using it. Cookies used for the essential operation of the site have already been set. To find out more about the cookies we use and how to delete them, see our Privacy Policy.

I accept cookies from this site