Tantec’s New PlasmaTEC-X Atmospheric Plasma treatment system or plasma generator is built around the concept of a high voltage DC Plasma discharge in atmospheric air. The versatility of this unit allows for use in fully integrated robotic cells, as a standalone unit, or most any production line.
- Plasma generator
- Atmospheric plasma
- Plasma discharge
- Standalone unit
- Or any production line
To ensure proper Plasma Discharge from the Discharge Nozzle the compressed air must be within a certain level of pressure and volume, the new AirTEC system, which is built into the PlasmaTEC-X ensures a constant flow to the Discharge Nozzle at all times.
With the AirTEC System the Generator automatically adjusts the air flow of the Discharge nozzle regardless of the cable/hose length. The AirTEC System in conjunction with the universal power input makes the PlasmaTEC-X very user friendly. No adjustments are necessary, simply connect to mains power and compressed air and the unit is ready for use.
This unit has huge environmental benefits compared to gas treatment, to flame treatment and to chemical treatment. Solve adhesion problems concerning cleaning, gluing, printing or surface modification with PlasmaTEC-X.
See the full features list and video below.
A Daisy Chain system is offered where any combination of 1-8 PlasmaTEC-X Generators can be controlled through a single control unit – the PlasmaREMOTE HMI unit. The units can be controlled individually through conventional relay system or from the Digital interface as a group with the same master signal.
Tantec’s latest feature now being offered is “Stand-By air low.” Through the HMI an operator can set an air flow during stand-by to avoid dust being attracted to the discharge head.
All connections from the PlasmaTEC-X Generator to the discharge nozzle is made through a standard plug, making it very easy to connect and use. Thanks to the DC technology and the AirTEC system no adjustments are necessary in case of cable length changes.
FEATURES Easy to install
The system must be connected to mains power and compressed air, no adjustment of air or power is necessary.
Standby air flow
The air flow is controlled electronically which allows for switching the on/off, A minor flow of air is part of stand-by, to avoid dust being attracted to the discharge nozzle.
Potential free discharge
Allows treatment of both conductive, non-conductive as well as semi-conductive surfaces.
Compact and Light weight
Compact and light weight makes the PlasmaTEC-X easy to integrate in almost any production line or robot cell.
High speed production
High power Plasma Discharge allows for high line speeds.
Output discharge control
Should the power drop below a pre-set level, the generator offers necessary alarm signals.
A large number of various signals are available on a digital interface to control and monitor the Plasma discharge at all times.
A HMI Control unit offers easy control and adjustment of parameters. The HMI Control unit can monitor and control from 1-8 units of the PlasmaTEC-X.
Automatic discharge air regulation
No matter the length of the power/air cable, the generator will adjust automatically to ensure the correct air pressure and flow.
Mains Voltage and
100-250VAC – 50/60Hz
(Universal power Input)
Ramp up time
Shut down time
< 1 ms
M12 (8 pole)
M12 (4 pole)
Weight in kg
(w. 2 mtr hose)
Treatment width in mm
Compressed air supply
5-6 bar, dry and clean
Compressed air connection
Units per PlasmaREMOTE
CE- RoHS - WEEE
CE- RoHS - WEEE
CE- RoHS - WEEE