Tantec’s New PlasmaTEC-X OEM Atmospheric Plasma treatment system is built around the concept of a high voltage DC Plasma discharge in atmospheric air. The versatility of this unit allows for use in fully integrated robotic cells, as a standalone unit, or most any production line.
The PlasmaTEC-X OEM is based on the technology of the PlasmaTEC device. The PlasmaTEC-X OEM can be used without the PlasmaREMOTE control unit. The target group is mainly mechanical engineers and OEM customers who want to use a single device only and do not require a control unit. The control and monitoring of the device can be achieved through the I/O interface with 24 V signals. An analysis of the operating conditions is also possible through a BUS interface.
|Easy to install
The system must be connected to mains power and compressed air, no adjustment of air or power is necessary.
|Standby air flow
The air flow is controlled electronically which allows for switching the on/off, A minor flow of air is part of stand-by, to avoid dust being attracted to the discharge nozzle.
|Potential free discharge
Allows treatment of both conductive, non-conductive as well as semi-conductive surfaces.
|Compact and Light weight
Compact and light weight makes the PlasmaTEC-X OEM easy to integrate in almost any production line or robot cell.
|High speed production
High power Plasma Discharge allows for high line speeds.
|Output discharge control
Should the power drop below a pre-set level, the generator offers necessary alarm signals.
Digital and analog control signals
|Automatic discharge air regulation
No matter the length of the power/air cable, the generator will adjust automatically to ensure the correct air pressure and flow.
|Technical Specifications||PlasmaTEC-X Generator||PlasmaTEC-X Nozzle|
|Mains voltage and frequency||100-250VAC - 50/60Hz
(Universal power input)
|Ramp up time||10 ms||N/A|
|Shut down time||< 1 ms||N/A|
|Control interface||M12 (8 pole)||M12 (8 pole)|
|Dimensions (WxLxH) mm||150x470x198||OD30x206|
|Weight in kg||6,1||1,1
(w. 2 mtr hose)
|Treatment width in mm||N/A||6-12 mm|
|Compressed air supply||4-8 bar, dry and clean||N/A|
|Compressed air connection||OD8mm
|Air consumption||N/A||33 ltr/min|
|Regulation compliance||CE - RoHs - WEEE||CE - RoHs - WEEE|