Tantec’s New PlasmaTEC-X Atmospheric Plasma treatment system is built around the concept of a high voltage DC Plasma discharge in atmospheric air. The versatility of this unit allows for use in fully integrated robotic cells, as a standalone unit, or most any production line.
To ensure proper Plasma Discharge from the Discharge Nozzle the compressed air must be within a certain level of pressure and volume, the new AirTEC system, which is built into the PlasmaTEC-X ensures a constant flow to the Discharge Nozzle at all times.
With the AirTEC System the Generator automatically adjusts the air flow of the Discharge nozzle regardless of the cable/hose length. The AirTEC System in conjunction with the universal power input makes the PlasmaTEC-X very user friendly. No adjustments are necessary, simply connect to mains power and compressed air and the unit is ready for use.
A Daisy Chain system is offered where any combination of 1-8 PlasmaTEC-X Generators can be controlled through a single control unit – the PlasmaREMOTE HMI unit. The units can be controlled individually through conventional relay system or from the Digital interface as a group with the same master signal.
Tantec’s latest feature now being offered is “Stand-By air low.” Through the HMI an operator can set an air flow during stand-by to avoid dust being attracted to the discharge head.1
Get a quote for this product!
All connections from the PlasmaTEC-X Generator to the discharge nozzle is made through a standard plug, making it very easy to connect and use. Thanks to the DC technology and the AirTEC system no adjustments are necessary in case of cable length changes.
|Easy to install
The system must be connected to mains power and compressed air, no adjustment of air or power is necessary.
|Standby air flow
The air flow is controlled electronically which allows for switching the on/off, A minor flow of air is part of stand-by, to avoid dust being attracted to the discharge nozzle.
|Potential free discharge
Allows treatment of both conductive, non-conductive as well as semi-conductive surfaces.
|Compact and Light weight
Compact and light weight makes the PlasmaTEC-X easy to integrate in almost any production line or robot cell.
|High speed production
High power Plasma Discharge allows for high line speeds.
|Output discharge control
Should the power drop below a pre-set level, the generator offers necessary alarm signals.
A large number of various signals are available on a digital interface to control and monitor the Plasma discharge at all times.
A HMI Control unit offers easy control and adjustment of parameters. The HMI Control unit can monitor and control from 1-8 units of the PlasmaTEC-X.
|Automatic discharge air regulation
No matter the length of the power/air cable, the generator will adjust automatically to ensure the correct air pressure and flow.
|Technical Specifications||PlasmaTEC-X Generator||PlasmaREMOTE||PlasmaTEC-X Nozzle|
|Mains voltage and frequency||100-250VAC - 50/60Hz
(Universal power input)
|Ramp up time||10 ms||N/A||N/A|
|Shut down time||< 1 ms||N/A||N/A|
|Control interface||M12 (8 pole)||M12 (4 pole)||N/A|
|Dimensions (WxLxH) mm||150x470x198||125x169x167||OD30x206|
|Weight in kg||6,1||2,0||1,1
(w. 2 mtr hose)
|Treatment width in mm||N/A||N/A||6-12 mm|
|Compressed air supply||5-6 bar, dry and clean||N/A||N/A|
|Compressed air connection||OD8mm
|Air consumption||N/A||N/A||33 ltr/min|
|Units per PlasmaREMOTE||N/A||1-8 PlasmaTEC-X
|Regulation compliance||CE - RoHs - WEEE||CE - RoHs - WEEE||CE - RoHs - WEEE|