Vacuum Plasma Treater | VacuTEC 100100

Standard VacuTEC system with customized chamber sizes. There are so many possibilities. Tantec has both standard VacuTEC machines, but also custom-designed machines. The VacuTEC customized machines are specially developed and adapted 100% to customer wishes and requirements in relation to the production line.

Tantecs VacuTEC Series Plasma Treater is designed for treatment of a large number of different injection moulded parts. The

VacuTEC offers very fast treatment times and optimum adhesion properties for downstream coating, gluing, painting and printing applications. In the treating chamber a vacuum is built up to between 0,1 and 3 mbar before an electrical discharge is created through the integrated plasma electrode.

Treatment cycle times are often short, between 5 – 60 seconds depending on the material and its formulation. VacuTEC uses the advanced Tantec power generator HV-X series as power supply and specially designed plasma transformer to provide voltage to the plasma electrodes.

Tantec Section Divider

Cases

Tantec Section Divider

Technical specifications

 

Technical Specifications VacuTEC 100100 | Vacuum Plasma Treater
Output voltage/plasma power 5kV / 2000 W
Power source HV-X20 generator
Compressed air inlet 6 bar dry & clean
Treatment gas Standard air, (option oxygen, argon, nitrogen on request)
Vacuum pump capacity 2 x 300 m³/hour (recomended), others on requset.
Vacuum level 0,1 – 3 mbar
Evacuation time, typical From 40 sec, depending on pump.
Plasma treatment time, typical From 20 seconds, depending on material
Electrical Controls Tantec HMI touch panel.
Regulation compliance CE – RoHS – WEEE
Chamber volume 1425 Liter
Treating volume 2 x 250 Liter
Tray size 1000 x 1000 x 250 mm
Shelves 2
Pump placement Standard behind, (option on top of VacuTEC)
Dimensions (W x D x H) 1990 x 1700 x 2165 mm
Tantec Section Divider